Improvising fuses without knowledge can be fatal to an electrical appliance (Esp-Eng)

in voilk •  4 months ago



    cltfz4oms007cmmsz9hr5grg3_IMG_20240221_231601.webp
    cltfz5cts007pmmsz1dw7bowe_IMG_20240221_231659.webp
    cltfz5xl80089mmsz1o3yc6sh_IMG_20240221_231636.webp
    cltfz6jbp008tmmszc5d8akas_IMG_20240221_232252.webp
    cltfz76ov008zmmsz9g6mgqgw_IMG_20240221_232305.webp
    cltfz7qqw0092mmszdwot808m_IMG_20240221_231737.webp
    cltfz8iib0095mmsz5oa352st_IMG_20240221_232606.webp
    cltfz92yk0098mmsz7y11auzs_IMG_20240221_232554.webp

    Esp.

    Los microondas son electrodomésticos muy populares en nuestros hogares, pero también son susceptibles a las averías por la potencia que usan cuando empiezan a trabajar.

    El amperaje de un microondas en plena marcha puede llegar a los 10 amp, estos electrodomésticos cuentan con una protección bastante efectiva para sobrecargas, pero cuando hay una sobrecarga en el sistema eléctrico el fusible se rompe y protege el circuito interno.

    En este microondas sucedió así, elmfiaible de 12 amp se rompió en un principio y el usuario colocó 3 hilos de cobre para supuestamente reforzarlo pero lo que hizo fue ocasionar un daño a la placa, donde pueden observar cómo se derritió la pista de línea.

    La solución fue reparar la línea y colocar un alambre fino de cobre para improvisar el fusible. Se coloca uno delgado para que se rompa con facilidad y no dañe el circuito interno, afortunadamente la improvisación del usuario no daño la tarjeta lógica del microondas y pudo encender.

    ENG

    Microwaves are very popular appliances in our homes, but they are also susceptible to breakdowns because of the power they use when they start working.

    The amperage of a microwave in full operation can reach 10 amps, these appliances have a fairly effective protection for overloads, but when there is an overload in the electrical system the fuse breaks and protects the internal circuit.

    In this microwave it happened like this, the 12 amp fuse broke at first and the user placed 3 copper wires to supposedly reinforce it but what it did was to cause damage to the board, where you can see how the line track melted.

    The solution was to repair the line and place a thin copper wire to improvise the fuse. A thin one is placed so that it breaks easily and does not damage the internal circuit, fortunately the improvisation of the user did not damage the logic board of the microwave and it could turn on.

    Translated with DeepL.com (free version)

    Todas las fotografías fueron tomadas con mí Smartphone Huawei Dub-Al00.

    png_20230217_194918_0000.png


    For the best experience view this post on Liketu

      Authors get paid when people like you upvote their post.
      If you enjoyed what you read here, create your account today and start earning FREE VOILK!